Conventional MCP compact, small, red, glass pane

804970

Approval: VdS, CNBOP

Including housing and alarm indicator. For connection to a conventional detection zone.
Additional Information:
If the glass pane is replaced with the optionally available plastic pane with reset function, the MCP can be reset from the outside using the key. For the surface mounting of the MCP the surface mount base Part No. 704980 must be ordered separately, if the cable wasn't laid about a standard flush mount wall socket. Type a definition - single action in accordance with EN 54-11 § 3.4.1 (excerpt taken from EN standard): Manual fire alarm unit, for which the alarm status is automatically set (additional alarm triggering is not required) after the fragile element has been broken or its position has been changed.

Scope of Delivery:
1 x Glass pane 704960
1 x Key 704966

1 x Multilingual paper labels with "Out of order" pictogram.

Alarm displayred LED and yellow actuation indicator
Alarm current @ 9 V DCtyp. 9 mA
Connection terminalmax. 2.5 mm² (AWG 26-14)
Application temperature-20 °C ... 70 °C
Operating voltage8 ... 30 V DC
Colorred, similar to RAL 3020
HousingPC ASA plastic
Weight gapprox. 110 g
Storage temperature-30 °C ... 75 °C
No. of detector/zone10 detectors per zone (according to VdS)
Detector specificationEN 54-11, type A
Air humidity< 95 % (non-condensing)
Quiescent current @ 9 V DCapprox. 0 μA
Type of protectionIP43, IP55 with cover 704965
VdS classF
VdS-NrG 205131
DimensionsW: 88 mm H: 88 mm D: 21 mm
  • 704980 Surface mount housing