IQ8MCP electronic module

804955

Approval: VdS

Same as 804971, but without housing.
  • Slimline design
  • Low power consumption
  • Plug-in connection terminals (two direction)
  • Optional terminal terminals
  • Triple key function (test, open, reset)
  • Detectors that are not ready for operation can be marked with the "Out of order" label by reversing the enclosed glass pane

Additional Information:
If the glass pane is replaced with the optionally available plastic pane with reset function, the MCP can be reset from the outside using the key. For the surface mounting of the MCP the surface mount base Part No. 704980 must be ordered separately, if the cable wasn't laid about a standard flush mount wall socket. Type a definition - single action in accordance with EN 54-11 § 3.4.1 (excerpt taken from EN standard): Manual fire alarm unit, for which the alarm status is automatically set (additional alarm triggering is not required) after the fragile element has been broken or its position has been changed.

Scope of Delivery:

1 x Glass pane 704960 1 x Multilingual paper labels with "Out of order" pictogram
Alarm displayred LED and yellow actuation indicator
Alarm current w/o communication curtainapprox. 18 mA
Connection terminalmax. 2.5 mm² (AWG 26-14)
Application temperature-20 °C ... 70 °C
Operation indicatorLED, green
Operating voltage8 ... 42 V DC
Weight gapprox. 78 g
Storage temperature-30 °C ... 75 °C
No. of detector/zonemax. 127 detectors per loop (as per VdS)
Detector specificationEN 54-11, type A
Air humidity< 95 % (non-condensing)
Quiescent current @ 19 V DCapprox. 45 μA
Type of protectionIP43 (in housing), IP 55 with cover 704965
VdS classF
VdS-NrG 205132
DimensionsW: 88 mm H: 88 mm D: 21 mm