IQ8MCP compact IP 66, small, red, with isolator glass pane

804961

Approval: G 205132

Suitable for esserbus and powered loop connection, with soft address coding, alarm latch and alarm indicator. Without BUS communication, the detector operates as conventional MCP. Detector housing, surface mount housing and transparent cover are included. Due to the high IP protection IP66 suitable for use in humid areas. Surface mount housing is provided with knock-out cable entries for M20 cable glands (option) for simplified installation.
  • High IP protection class IP66
  • Integrated loop isolator
  • Triple key function (test, open, reset)
  • Plug-in connection clamps
  • Detectors that are not ready for operation can be marked with the "out of order" label by reversing the enclosed glass pane

Additional Information:
If the glass pane is replaced with the optionally available plastic pane with reset function, the MCP can be reset from the outside using the key. For the surface mounting of the MCP the surface mount base Part No. 704980 must be ordered separately, if the cable wasn't laid about a standard flush mount wall socket. Type a definition - single action in accordance with EN 54-11 § 3.4.1 (excerpt taken from EN standard): Manual fire alarm unit, for which the alarm status is automatically set (additional alarm triggering is not required) after the fragile element has been broken or its position has been changed.

Scope of Delivery:

1 x Spare glass 704960
1 x Plastic spare key 704966
1 x transparent cover
1 x Surface mount housing
Alarm displayLED, red and yellow flag
Alarm current @ 9 V DCtyp. 18 mA
Connection terminalmax. 1,5 mm² (AWG 30-14)
Application temperature-20 °C ... 70 °C
Operation indicatorLED, green
Operating voltage8 ... 42 V DC
Colorred, similar to RAL 3020
HousingPC-ASA plastic
Weight gapprox. 250 g
Storage temperature-30 °C ... 75 °C
No. of detector/zone10 detectors / group; 127 detectors / ring (according to VdS)
Detector specificationEN 54-11, type A
Air humidity< 95 % (non-condensing)
Quiescent current @ 19 V DCapprox. 45 μA
Type of protectionIP66
DimensionsW: 88 mm H: 88 mm D: 57 mm (with surface mount housing)