VARIODYN® D1 Comprio 4-8 (Stand alone)

583940

Approval : Part of EN 54-16

Comprio is the central controlling unit of VARIODYN® D1 system for small and mid-sized objects. The Comprio, together with the 4XD125B four-channel amplifier, forms a voice alarm system for projects such as schools, smaller hotels, etc. The emergency power supply is built in to the 4XD125B four-channel amplifier. For voice alarm systems compliant with DIN VDE 0833-4 and electro-acoustic emergency warning systems compliant with EN 60849.
All power amplifiers are continuously monitored. In case a power amplifier is faulty, it can be replaced dynamically by a spare amplifier. The switching takes place automatically via Comprio.
The loudspeaker lines are permanently monitored for short circuit, ground fault, failure as well as impedance deviation. Faulty loudspeaker zones are separated in a non-reacting manner. Comprio contains storage capacity for pre-stored messages, which can be used for alarm texts and signals (evacuation alarm, all-clear signal) and caution signals (gong). The volume of each source and each amplifier channel can be controlled. Additional filters like parametric equalizer, high-and low pass filter as well as delays are available as well. All errors are recognized, displayed and recorded within few seconds meeting the standards. For special applications like e.g. tunnel, delays can be programmed up to 9.9 sec.
The controlling unit Comprio is equipped with 4 independent amplifier channels, in order to operate 8 loudspeaker zones all together. The Comprio also has 12 contact inputs, 8 of which can be programmed to be monitored, as well as 8 potential-free relay outputs, one audio-line output, up to 3 audio-line inputs and/or up to 3 microphone inputs, 3 DAL connections and one TWI connection.
This variant is a ;stand-alone; unit. If Ethernet networking is desired, this can be implemented with the network variant Part No 583344. When ordering, we recommend looking at our very attractively priced product package Part No. 583946. Additional accessories like housing, cable, call station etc. must be separately ordered.
  • Certified in accordance with EN 54-16
  • Compliant with DIN VDE 0833-4
  • Compliant with IEC 60849
  • All the functions of an alarm and evacuation system in a 19’’ module
  • Permanent monitoring of all functionally relevant system parts
  • Automatic and dynamic switchover to redundant spare amplifiers
  • Automatic volume control (ALR) also during announcements
  • Two monitored 24 V DC power supplies
  • 12 contact inputs (8 of which can be programmed to be monitored)
  • 8 potential-free relay outputs, up to 3 audio-line inputs and/or up to 3 microphone inputs
  • 3 DAL connections
  • 1 TWI connection
  • Voice and audio memory up to 1 hour

Additional Information:
DOM components are “neutrally” delivered. Please use a ventilation field part no. 583708.HO for each DOM.
Output impedance> 5 kΩ, < 500 pF
Operating voltage24 V DC
Load impedancetyp. 200 Ω
Input typesymmetrically
Signal/Noise ratio Output> 70 dB/75 dB (A)
Signal/Noise ratio Input> 60 dB/65 dB (A)
Weight kg approx. 5.7 kg
Power consumption50 /80 W
Harmonic distortion at nominal level< 0.03 %
Contact load relay100 V DC/1 A
Storage temperature-10 °C ... 60 °C
max. Outputlevel< 6 dBu
Nominal level for emergency telephone station0 dBu
Nominal level Output0 dBu
Nominal level Input-51 dBu
Air humidity15 ... 90 % (non-condensing)
Current consumption< 2.6 A
Transmission range20 ... 20000 Hz
Ambient temperature-5 °C ... 55 °C
DimensionsW: 483 mm H: 133 mm D: 345 mm (3 HE, 19")
  • 583708.HO Ventilation panel 1 HU with Honeywell logo
  • 583308 Handheld microphone for VARIODYN D1 Comprio
  • 583444 backup cable RC44 VARIODYN D1
  • 584913 Enclosure for Comprio
  • 584913.R Enclosure for Comprio (mounting included)
  • 583413 Cable harness for connecting the batteries to VARIODYN D1 Comprio
  • 581732 Battery 12 V / 65 Ah
  • 583414 Cable harness 24 V DC-VARIODYN D1 Comprio / 4XD125B
  • 583440 Peripheral clamp for top-hat rail
  • 583466 Patch cable Cat5, 0.5 m grey (periphery)
  • 583467 Patch cable Cat5, 1.0 m grey (periphery)
  • 583469 Patch cable Cat5, 3.0 m grey (periphery)
  • 583496 End-of-line module (EOL)
  • 581316 Microphone, for ALR
  • 583703 Mounting set 1
  • 583332 Overvoltage protection for UIM contacts