Single channel output module

MI/DCMO

MI/DCMO optionally supervises the wiring to the load devices and, upon command from the control panel, switches an external power supply to operate these devices. It also has built-in short circuit isolation capability. In normal supervised mode, the device switches out the load supervision and switches in the external power supply through a double pole relay.
The external power supply is monitored and raises an unlatched fault condition if the voltage falls below the fixed threshold. In the unsupervised mode, the device provides neither load nor power supply supervision and can be used to switch a single form C set of changerover contacts.
  • Single output - Relay or Sounder mode
  • DIN rail mounting option
  • Rotary decade address switches
  • Analogue addressable communications
  • Tri-color LED status
  • Plug-in connectors
  • Built-in short circuit isolators
  • Specifications: EN54-17, EN54-18
  • LPCB approved
Operating voltage 15 ... 30 V DC
Dimension H: 93 mm W: 94 mm D: 23 mm
Weight 62 g
Ingress protection IP30 (IP50 in M200E-SMB)
Temperature range -20°C ... 60°C
Max. wire guage 2.5 sqmm
Quiescent current 310 uA @ 24 V DC (no communications) 510 uA @ 24 V DC (LED blink enabled)
Relative humidity 0 ... 95% (non-condensing)
Relay specification unsupervised 2 A @ 30 V DC, resistive Load
  • M200ESMB…..Surface Mounting Box
  • M200E-DIN……Surface mounting clip for single module
  • SMB6-V0 Surface mount box for 6 modules